![background image](http://html1.mh-extra.com/html/jbc/tia-a/tia-a_manual_3535963006.webp)
2
+
-
-
+
1
2.
Connect the TIA-A Thermometer as follows:
3.
Choose the temperature on the generator and take a reading on the thermometer.
4.
Take note of the deviation to correct future readings.
5.
Fit the STA-A sensor in place.
TIA-A
Pattern generator
Thermocouple Type E
Calibration
Sensor
Type E
Ref. STA-A
1.
Pull out the sensor and adjust the reading needle using a screwdriver at room temperature.
6