Maintenance
Before carrying out maintenance or storage,
always allow the support to cool down.
- Check periodically that the Support is clean,
especially the axes of the sliding guide.
- Use a damp cloth when cleaning. Alcohol
can only be used to clean the metal parts
- Replace any defective or damaged piece.
Use original JBC spare parts only.
- Repairs should only be performed by a JBC
authorized technical service.
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
PCB PLACEMENT 1
PCB PLACEMENT 2
PCB PLACEMENT 3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
10
10
Now adjust the positions of the other requiered slot clamps to the PCB shape and tighten their clamp
knobs (10) after the adjustment.
The clamp knobs can be loosened and tightened by hand and/or by means of the provided Allen key.
The Allen key is stored on the side of the support and held in place by a built-in magnet.
Allen Key
Note:
The spring guide is not adjustable, but is spring loaded, which allows to change PCBs quickly.
See next chapter “Fast PCB Repalcement”.