jbc NAE Series, Instruction Manual

Page: 6 / 16

Export graphics
Insert a USB flash drive into the USB-A
connector to save your soldering
process in csv format.
Profi les
Advanced Functionalities
It provides detailed graphics of tip temperature and power delivery in real time during
solder joint formation for analysis purposes. This helps you decide how to adjust your
process or which tip to use to obtain the best quality soldering.
Graphics
Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC,
this new and unique feature allows controlling the heating ramp up rate of the tool to
gradually increase the temperature of the component through all the phases of the
soldering process. Up to 25 fully confi gurable soldering profi les can be stored.
System Notifications
The following icons will be displayed on the screen’s status bar.
Station update
Download the JBC Update File from
www.jbctools.com/software.html
Insert the USB flash drive with the file
downloaded to the station.
Files
Update
USB fl ash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot down-
loaded to the station.
Station software update. Press INFO to start
the process.
Warning. Press INFO for failure description.
Error. Press INFO for failure description,
the type of error and how to proceed.
2
17:14
Hibernation
Actual Temp. 25ºC
Port
2
350
ºC
Port
2
Power
45%
17:14
Selected 350ºC
NT115 NT115
NAE
Control Unit
PORT
2
ROBOT
PEDAL
2
NAE
Control Unit
PORT
2
ROBOT
PEDAL
2
ROBOT
C115 C11
C105 /
C105 / C115
19:29 19:29
Port
2
Actual Temp. 25ºC
NT105
ºC
Power
45%
Selected 350ºC
350
Port
2
NT105
Hibernation
19:29
Port
2
Actual Temp. 25ºC
AN115
Hibernation
19:29
ºC
Power
45%
Selected 350ºC
350
Port
2
AN115
No
Yes
NAE
Control Unit
PORT
2
ROBOT
PEDAL
2
PORT
1
PEDAL
2
NAE
Control Unit
PORT
2
ROBOT
PEDAL
2
NAE
Control Unit
PORT
2
ROBOT
PEDAL
2
ROBOT
C115 C11
C105 /
C105 / C115
19:29
19:29
Port
2
Actual Temp. 25ºC
NT105
ºC
Power
45%
Selected 350ºC
350
Port
2
NT105
Hibernation
19:29
Port
2
Actual Temp. 25ºC
AN115
Hibernation
19:29
ºC
Power
45%
Selected 350ºC
350
Port
2
AN115
No
Yes
NAE
Control Unit
PORT
2
ROBOT
PEDAL
2
PORT
1
PEDAL
2
Operation
When the tool is lifted from the holder the tip will
heat up to the selected temperature. When the tool is in the holder, the power is cut
off and the tool cools down to room temperature.
Tool Settings:
· Operating Temp. and Temp. Levels
Press , select Tool Settings and
activate the Temp. Levels option.
Change Work temperature and Temp.
Levels from 90 to 450 ºC.
or steps of ±5 ºC / ºF
Tool Settings:
· Hibernation
Change Hibernation delay from 0 to
60 min or no Hibernation.
2. Hibernation 1. Work
This revolutionary technology is able to recover tip temperature extremely quickly.
This allows the user to work at a lower temperature.
As a result, tip life increases by 5.
JBC’s Exclusive Heating System
NAE
Control Unit
PORT
2
ROBOT
PEDAL
2
PORT
1
PEDAL
2
C115 C11
C105 /
C105 / C115
NAE
Control Unit
PORT
2
ROBOT
PEDAL
2
NAE
Control Unit
PORT
2
ROBOT
PEDAL
2
NAE
Control Unit
PORT
2
ROBOT
PEDAL
2
PORT
1
PEDAL
2
6