background image

Minimum temperature

Set the minimum temperature 
to work with. Min. temp. by 
default is 200ºC (392ºF). This 
is considered to be a proper 
starting point for leaded 
applications.

Maximum temperature

Set the maximum temperature 
to work with. Max. temp by 
default is 400°C (750°F). This 
is considered high enough 
to work with most lead-free 
applications.

Temperature unit

Celsius (ºC) or Fahrenheit (ºF) 

Recommendations  

Parameter description

N/a

Warnings

The station temperature 
range is 90-450ºC 
(190-840ºF). Change the 
temperature limits when 
working with less common 
applications such as low / high 
melting point soldering (HMP) 
or plastics (e. g. riveting).

Working with 

temperatures over 400°C 
(750°F) can damage the 
PCB and its components. 
Even in short time periods 
of tip contact with the 
soldering joint, the flux 
may not work properly and 
could reduce tip life. If the 
solder joint requires more 
power (e.g. multilayered or 
high dissipation boards), 
JBC recommends using 
other aids like preheaters.

Be careful when using these parameters. They can reduce tip life if not used properly. Please follow 
the recommended guidelines: 

Parameters

Beep

Enable/disable the beep 
sound of the keypad.

N/a

N/a

Sleep delay

Set the time that the tool 
will remain at the selected 
temperature when in the stand 
before entering sleep mode. 
The tip temperature will then 
drop to the Sleep temperature.

The sleep temperatures are 
set to achieve a balance 
between preventing oxidation 
and reaching the working 
temperature in a few seconds.

Because our tools reach the 
working temperature from 
the Sleep mode in a few 
seconds, this parameter is 
preset to 0 min. Once the tool 
is returned to the stand the 
temperature will drop to the 
sleep temperature, extending 
tip life and avoiding oxidation. 
Retinning the tip before placing 
the tool in the stand will protect 
the tip and extend its life.

Setting these 

parameters to higher 
values will unnecessarily 
accelerate oxidation and 
shorten tip life especially 
when working with 
temperatures up to 450°C 
(840°F).

Sleep temperature

This is the set temperature the 
tip reaches when returned to 
the stand.

8

Summary of Contents for LC-2SIA













Reviews: