jbc GSF Series, Instruction Manual

Page: 6 / 12

Con�nuous
Supplied: 12 mm
Sta�on se�ngs
Tool se�ngs
Counters
Reset
Feeder se�ngs
Con�nuous
Supplied: 12 mm
Tin reload process
Mode Con�nuous
5.0mm/s
Off
None
Speed
Wire diameter
Feeder parameters lock
Backward
Back
Con�nuous
Supplied: 12 mm
Tin reload process
Forward
Bakward
Place the �n on the gears
and press:
Press ok to exit
Con�nuous
Supplied: 12 mm
Program
Con�nuous
Discon�nuous
Mode
Back
Con�nuous
Supplied: 0 mm
Discon�nuous
mm/s
Con�nuous
Supplied: 12 mm
Tin reload process
Mode Con�nuous
20.0mm/s
Off
Speed
Wire diameter
Feeder parameters lock
Backward
Back
Con�nuous
Supplied: 12 mm
Feeder parameters lock
20.0mm/s
Off
Speed
Tin reload process
Wire diameter
Backward
Back
Mode Con�nuous
Con�nuous
Supplied: 12 mm
Feeder parameters lock
Off
Edit program
Programs loaded
Set default programs
Tin reload process
Wire diameter
Backward
Back
Mode Program
Con�nuous
Supplied: 12 mm
Edit program
Speed
Con�nuous
Supplied: 12 mm
Edit program
Speed
Con�nuous
Supplied: 12 mm
Tool se�ngs
Counters
Reset
Feeder se�ngs
Sta�on se�ngs
Con�nuous
Supplied: 12 mm
English
Deutsch
Español
Italiano
Français
日本語
한국어
Português
Pусский
Con�nuous
Supplied: 12 mm
Program version
Maximum temp
Off
Minimum temp
Sound
Temp units
Length units
Sta�on reset
Back
Con�nuous
Supplied: 12 mm
Temp adjust
Temp level set
Off
Sleep delay
Peripher.
Sleep temp
Hiberna�on delay
Back
Con�nuous
Supplied: 12 mm
Plug hrs
Working hrs
Part Tot
Sleep hrs
Sleep cyc
Fed cyc
Fed mm
Hiber hrs
No tools hrs
Con�nuous
Supplied: 12 mm
Feeder parameters lock
20.0mm/s
Off
Speed
Tin reload process
Length
Wire diameter
Backward
Back
Mode Discon�nuous
Con�nuous
Supplied: 12 mm
Tin reload process
Mode Con�nuous
5.0mm/s
Off
None
Speed
Wire diameter
Feeder parameters lock
Backward
Back
Con�nuous
Supplied: 12 mm
Sta�on se�ngs
Tool se�ngs
Counters
Reset
Feeder se�ngs
Con�nuous
Supplied: 12 mm
Tin reload process
Mode Con�nuous
5.0mm/s
Off
None
Speed
Wire diameter
Feeder parameters lock
Backward
Back
Con�nuous
Supplied: 12 mm
Tin reload process
Forward
Bakward
Place the �n on the gears
and press:
Press ok to exit
Con�nuous
Supplied: 12 mm
Program
Con�nuous
Discon�nuous
Mode
Back
Con�nuous
Supplied: 0 mm
Discon�nuous
mm/s
Con�nuous
Supplied: 12 mm
Tin reload process
Mode Con�nuous
20.0mm/s
Off
Speed
Wire diameter
Feeder parameters lock
Backward
Back
Con�nuous
Supplied: 12 mm
Feeder parameters lock
20.0mm/s
Off
Speed
Tin reload process
Wire diameter
Backward
Back
Mode Con�nuous
Con�nuous
Supplied: 12 mm
Feeder parameters lock Off
Edit program
Programs loaded
Set default programs
Tin reload process
Wire diameter
Backward
Back
Mode Program
Con�nuous
Supplied: 12 mm
Edit program
Speed
Con�nuous
Supplied: 12 mm
Edit program
Speed
Con�nuous
Supplied: 12 mm
Tool se�ngs
Counters
Reset
Feeder se�ngs
Sta�on se�ngs
Con�nuous
Supplied: 12 mm
English
Deutsch
Español
Italiano
Français
日本語
한국어
Português
Pусский
Con�nuous
Supplied: 12 mm
Program version
Maximum temp
Off
Minimum temp
Sound
Temp units
Length units
Sta�on reset
Back
Con�nuous
Supplied: 12 mm
Temp adjust
Temp level set
Off
Sleep delay
Peripher.
Sleep temp
Hiberna�on delay
Back
Con�nuous
Supplied: 12 mm
Plug hrs
Working hrs
Part Tot
Sleep hrs
Sleep cyc
Fed cyc
Fed mm
Hiber hrs
No tools hrs
Con�nuous
Supplied: 12 mm
Feeder parameters lock
20.0mm/s
Off
Speed
Tin reload process
Length
Wire diameter
Backward
Back
Mode Discon�nuous
325
º
C
Con�nuous
Supplied: 12 mm
Tin reload process
Mode Con�nuous
5.0mm/s
Off
None
Speed
Wire diameter
Feeder parameters lock
Backward
Back
Changing Guide Kits
Assemble the counter wheel (1).
Insert the intermediate nozzle (2) until its collar
rests against the housing and tighten the screw.
Assemble the inlet nozzle (3).
Assemble the guide wheel (4) and tighten the
screw.
Assemble the blade first, then mount the
blade clamp (5) onto the same axis and tighten
the screw.
Caution: handle the blade carefully
to avoid injury.
Insert the guide set (6).
Assembly with Solder Wire Perforation:
Assembly without Solder Wire Perforation:
Changing Wheels and Blade
For this operation, disconnect the device from the mains. Disconnect the tool from the control unit
and open its cover.
First disassemble the guide tube (6), the nozzles (2)+(3), then the wheels, blade and clamp (4)+(5).
Disassemble the counter wheel (1). Use the allen key and the spanner, provided with the station.
Assemble the counter wheel (1).
Insert the intermediate nozzle (2) until its collar
rests against the housing and tighten the screw.
Assemble the inlet nozzle (3).
Assemble the traction wheel (4) onto the axis
and tighten the screw.
Assemble the support wheel (5) and tighten
the screw.
Insert the guide set (6).
Traction
Wheel
Support
Wheel
Interm.
Nozzle
Inlet
Nozzle
Counter
Wheel
1
2
3
4
5
Inlet
Nozzle
Interm.
Nozzle
Blade
Blade
Clamp
Guide
Wheel
Guide
Set
Guide
Set
Counter
Wheel
1
2
3
4
5
6 6
Blade
Blade Clamp
Inlet
Nozzle
Guide
Wheel
Intermediate
Nozzle
Traction
Wheel
Support
Wheel
Intermediate
Nozzle
Inlet
Nozzle
Counter
Wheel
Counter
Wheel
1
4
1
2
3
4
5
5
4
2
3
6
6
Guide
Set
Guide
Set
6