jbc DMP, Instruction Manual, Page: 9 / 24

Peripherals
17:14
Port 1 2 3 4
MS a
?
Tools
?
17:14
T245 - port 3
Cartridge Adjust C245-003
Temperature adjust 0ºC
Temp. level set Off
Sleep delay 0 min.
Peripherals
17:14
Port 1 2 3 4
MS a
?
PERIPHERAL
Peripheral 1 plugged:
Electric Suction Module
Setup Postpone
Peripherals
1. To configure your Electronic Suction Module
press Setup in the popup window.
MSE Initial Setup
After connecting the electric desoldering module (MSE-A), a popup window is
opened.
2. Select the module from the list of peripheral
connections.Remember your first connection
is denoted as “a”, the second being “b”, etc.
(e.g. MS_a, MS_b,...)
3. Select the port of the tool you want to link to
the peripheral.
4. Press Menu or Back to save changes.
Once set up, you can change the module
settings by entering the
Peripherals Menu.
Insert the cartridge model and the station will
recognize its characteristics (size and shape) to
provide better temperature precission.
After inserting
the cartridge,
introduce
the last 3
numbers of
its reference.
Cartridge Adjustment
USB flash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot.
Station software update.
Press INFO to start the process.
System notifications
Warning.
Press INFO for failure description.
Error.
Press INFO for failure description,
the type of error and how to proceed.
Indicates there is a peripheral to be
installed.
The following icons will be displayed on the screen’s status bar.
www.jbctools.com
9