HEAT MANAGEMENT
2
DM /
4 TOOLS CONTROL UNIT
DM-2B / DM-1B / DM-9B
CONTROL UNIT
MS-A
DESOLDERING PUMP
DR-SC
DESOLDERING STAND
Connectable tools:
T210, T245, PA120, HT420, AP130, DR560
and
DS360.
Connectable modules:
MS, MV
and
MN.
INSTALLATION
Power Cord
Socket
USB Connector
to PC
JBC stations intelligently manage the tool temperature:
Work mode:
When the tool is used, pre-set work temperature is 350º C.
Sleep mode:
When the tool is in the stand, the temperature goes down to 180º C (
depending of the configuration).
Hibernation mode:
After longer periods of inactivity (pre-set i.e 30 minutes), the power is cut off and the
tool cools down to room temperature.
Heat management increase tip life which reduces cost of ownership.
CONTROL UNIT
POWER CORD
MANUAL
DM
4 TOOLS CONTROL UNIT
www.jbctools.com
