background image

Hibernation Delay

Set the time the tool will 
remain at Sleep temperature 
before entering the Hibernation 
mode. At this time, the power 
supply is cut off and the tip 
remains at room temperature.

Tool Settings

Recommendations

Parameter description

Warnings

Increasing the default 

value will accelerate 
oxidation and shorten the 
tip life.

When the user changes 

the cartridge type, the 
parameter should be reset 
to 0°C/F or to the value 
needed for this cartridge. 
E.g. If a correction of 
+20°C (+36°F) is set for the 
C245966 (thick type) and 
then the user changes the 
cartridge for a C245030 
(which is thinner) without 
resetting, they would be 
working at a temperature 
of +20°C (+36°F) lower for 
the C245030 which does 
not need any temperature 
adjustment.

This function completely 
protects the tip from oxidation 
during long periods of 
inactivity while the tool is in the 
stand.  
Retinning the tip before 
placing the tool in the stand 
also helps prevent oxidation 
and extends the life of the tip. 

Temp Adjustment

It provides a more precise 
adjustment between the 
selected temperature and the 
actual one.

Set values within ±50°C  
(± 90°F) to achieve zero error. 
JBC strongly recommends 
the use of TID-A or TIA-A 
Thermometers to obtain 
precise readings.

www.jbctools.com

13

Summary of Contents for CDE-BA Series





















Reviews: