background image

Sleep delay

Set the time that the tool 
will remain at the selected 
temperature when in the stand 
before entering sleep mode. 
The tip temperature will then 
drop to the Sleep temperature.

Fix one temperature

Fix a value within the 
temperature range of the 
station (90-450ºC/190-840ºF). 

Temperature levels set

Similar to “Fix one temp” 
parameter. In this case, the 
user can set up to 3 values for 
different power requirements. 

The sleep temperatures are 
set to achieve a balance 
between preventing oxidation 
and reaching the working 
temperature in a few seconds.

Ideal for soldering more than 
one component at a specific 
temperature. The station will 
reject any attempt to change 
the temperature.

This allows a quick change 
between 3 different tempe-
ratures. Set them according 
to the allowed values for your 
soldering applications.

Because our tools reach the 
working temperature from the 
deafult Sleep mode in only a 
few seconds, this parameter is 
preset to 0 min. Once the tool 
is returned to the stand the 
temperature will automatically 
drop to the sleep temperature, 
extending tip life and avoiding 
oxidation. Retinning the tip 
before placing the tool in the 
stand will protect the tip and 
extend its life.

Recommendations 

Parameter description

Warnings

N/a

N/a

Setting these 

parameters to higher values 
will unnecessarily accelerate 
oxidation and shorten tip 
life especially when working 
with temperatures up to 
450°C (840°F).

Tool Settings

Sleep temperature

This is the set temperature the 
tip reaches when returned to 
the stand.

12

Summary of Contents for CDE-BA Series





















Reviews: