![background image](http://html.mh-extra.com/html/jbc/ca-qf/ca-qf_instruction-manual_636989009.webp)
OK
TOOL
EAR
THING FUSE
AUX
USE ONL
Y
WITH A 250
V FUSE
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
OK
TOOL
EAR
THING FUSE
AUX
USE ONL
Y
WITH A 250
V FUSE
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
OK
TOOL
EAR
THING FUSE
AUX
USE ONL
Y
WITH A 250
V FUSE
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
4.
Take out the feeder nozzle and replace it
with the new one while holding the three
components, identified in the picture, in
place. Reassemble the cover and tighten
the three screws.
2.
Adjust the feeder nozzle length and
thighten the srew.
Regulating Feeder Nozzle
1.
Depending on the cartridge used and the
component to be soldered, you can vary
the feeder nozzle length up to 10mm.
Feeder Nozzle
The 3 components
www.jbctools.com
9