OK
TOOL
EAR
THING FUSE
AUX
USE ONL
Y
WITH A 250
V FUSE
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
OK
TOOL
EAR
THING FUSE
AUX
USE ONL
Y
WITH A 250
V FUSE
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
OK
TOOL
EAR
THING FUSE
AUX
USE ONL
Y
WITH A 250
V FUSE
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
OK
TOOL
EAR
THING FUSE
AUX
USE ONL
Y
WITH A 250
V FUSE
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
AP250-A
Mark
2. Inserting
Changing Cartridge
To change a catridge safely, unplug the tool or turn off the station before following these guide-
lines.
Loosen the screw and remove the cartridge.
Use a flat pliers if still hot.
1. Removing
Important:
Insert the cartridge as far as the
mark for a correct connection.
4. Fixing
Align the cartridge tip with the feeder
nozzle. Use a flat pliers for a correct tip
alignment.
3. Aligning
Important:
Tighten the screw again. This is
necessary for the tool to function. Being careful
not to over-tighten.
Alignment
6
