ENGLISH
2
Structure of Advanced soldering stations
system
The Advanced series has basic modules giving
you full flexibility for choosing what you need for
the work in hand, the modules being supplied
separately.
Dual control unit
-
AD 4200
EU
Ref. 4200200
-
AD 4200
UK
Ref. 4200201
Model
AD 4200
can be used with two tools
simultaneous, either handpieces or desoldering
tweezers. Can be used with either combination of
2010
,
2210
,
2045
and
2245
handpieces and the hot
tweezers
PA 1200
or
PA4200
.
Handpieces
-
2010
Ref. 2010000
Power: 20W. For high precision work, SMD, etc.
-
2210
Ref. 2210000
Power: 20W. For high precision work, SMD, etc.
-
2045
Ref. 2045000
Power: 50W. For general soldering work.
-
2245
Ref. 2245000
Power: 50W. For general soldering work.
Hot tweezers
-
PA 1200
Ref. 1200000
For general precision desoldering with SMD
components.
Power: 40W.
Effective power per cartridge fitted: 20W.
-
PA 4200
Ref. 4200000
For general desoldering and soldering work in
professional electronics.
Power: 100W.
Effective power per cartridge fitted: 50W.
Cartridges
- Range of cartridges
2010
(for the
2010
handpiece).
- Range of cartridges
2210
(for the
2210
handpiece).
- Range of cartridges
2045
(for the
2045
handpiece).
- Range of cartridges
2245
(for the
2245
handpiece).
- Range of cartridges for micro hot tweezers
PA 1200
.
- Range of cartridges for hot tweezers
PA 4200
.
Stands
- Soldering iron stand
AD 8200
Ref. 0268200
-
PA 8420
Ref. 0748420
Stand for the hot tweezers
PA 4200
.
-
PA 8100
Ref. 0748100
Stand for the hot tweezers
PA 1200
and
PA 4200
.
For a dual soldering station work properly is
necessary: the dual control unit, a handpiece or the
hot tweezers, and the corresponding stand and
cartridge.
Dual control unit AD 4200
The station is supplied with:
- Control unit.
- Connection cable to mains.
- Instructions manual.
- Transport packaging.
Technical specifications
- Temperature selection from 100 to 371°C (±5%).
- Power: 135W.
- Safety transformer, mains separator and double
isolation, with integrated fuse of temperature
protection.
- Input: 230V 50Hz. Output: 24V.
- Electrical protection Class I.
- Total weight of unit: 5Kg.
- ESD protected housing.
Typical surface resistance: 10
5
-10
11
Ohms/
square.
- Complies with CE standards on electrical safety,
electromagnetic compatibility and antistatic
protection.
- Equipotential connector is earth connected to the
plug feed of the station.
RECOMMENDATIONS FOR USE
For soldering and desoldering
-
Clean the contacts and the printed circuit to
be desoldered of dust or dirt.
-
Preferably select a temperature below 350°C.
Excess temperature may cause the printed
circuit tracks to break loose.
-
The tip must be well tinned for good heat
conduction. If it has been inoperative for any
length of time, it should be retinned.
Summary of Contents for AD 4200
Page 48: ...ITALIANO 52 ELECTRIC WIRING DIAGRAM...
Page 49: ...ITALIANO 53...