ENGLISH
USER MANUAL
JB SYSTEMS®
3/12
EZ-CON 192
Some words explained:
•
SCENE:
A scene is a set of different fader values that describes a certain condition at a given
moment.
Example: You have set the faders on the EZ-CON 192 to put a fixture in a certain direction, with a
certain gobo and a certain co
lor. The combination of these different fader values is called “SCENE”
•
BANK
: On the EZ-CON 192 there are 8 scene buttons. Under each scene button a scene can be
stored. To have a total of 160 scene memories you need to put these scenes in banks. That is why
you have 20 banks with each 8 scenes: 20 x 8 = 160 scenes.
Example:
BANK1 (scene1 ; scene2 ;
scene3 ; … scene8)
BANK2
(scene1 ; scene2 ; scene3 ; … scene8)
BANK3
(scene1 ; scene2 ; scene3 ; … scene8)
…
BANK20
(scene1 ; scene2 ; scene3 ; … scene8)
•
CHASE
: On the EZ-CON 192 there are 6 programmable chases. A chase is a succession of scenes.
This succession of scenes can be programmed by the user in any order. One chase can contain a
maximum of 160 scenes.
•
SPEED
: time between 2 scenes in a chase running in automatic mode.
•
FADE TIME
: This is the amount of time it takes for a fixture (or fixtures) to move from one position to
another.
•
PAN/TILT
: PAN means moving horizontally or moving on the X-axis.
TILT means moving vertically or moving on the Y-axis.
FUNCTIONS
1. [FIXTURE] BUTTONS:
Used to select one or more fixtures (1-12).
2. [FIXTURE] INDICATOR:
Shows the selected fixture(s) when lit.
