background image

ENGLISH 

 

USER MANUAL 

 

 
JB SYSTEMS® 

1/12 

EZ-CON 192 

OPERATION MANUAL

 

Thank you for  buying this  JB Systems

®

 product. To take full advantage of all possibilities and for your 

own safety, please read these operating instructions very carefully before you start using this unit.

  

 

FEATURES 

  Versatile DMX controller for mobile DJ

’s, pubs and small discotheques  

  192 DMX channels 

  12 Fixtures of 16 channels each (best used with fixtures having up to 8 channels) 

  20 Banks of 8 programmable scenes (total = 160 scenes) 

  6 Programmable chases of 160 scenes 

  8 Sliders for manual control of channels 

  2 jog wheels for easy Pan and Tilt navigation 

  USB A port for saving programmed shows on a memory stick 

  No external power adapters thanks to the build in power supply! 

  Auto mode program controlled by speed and fade time sliders 

  Fade time/Assign fade time 

  Reversible DMX channels allows fixture to react in opposition to others in a chase 

  8 channel or 16 channel mode 

  Blackout master button 

  Manual Override button allows you to grab any fixture on the fly 

  Built in microphone for music triggering 

  MIDI control over banks, chases and blackout 

 

BEFORE USE 

  Before  you  start  using  this  un

it,  please  check  if  there’s  no  transportation  damage.  Should  there  be 

any, do not use the device and consult your dealer first.  

 

Important: 

This  device  left  our  factory  in  perfect  condition  and  well  packaged.  It  is  absolutely 

necessary for the user to strictly follow the safety instructions and warnings in this user manual. Any 
damage caused by mishandling is not subject to warranty. The dealer will not accept responsibility for 
any resulting defects or problems caused by disregarding this user manual. 

  Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user 

manual. 

  To protect the environment, please try to recycle the packing material as much as possible. 

 

Check the contents: 

Check that the carton contains the following items: 

  EZ-CON 192 controller 

  Mains cable 

  Gooseneck USB LED light 

  Operating instructions 

 

 
 
 

Summary of Contents for EZ-CON 192

















Reviews: