ENGLISH
USER MANUAL
JB SYSTEMS
®
6/12
CLUBSPOT
Led Display on/off [LEd]
Switches the LED display automatically off or not.
•
Press the [MENU] and
▲/▼ buttons until “
[Led]
” is shown on the display.
•
Press the [ENTER] button.
•
Use
▼ and ▲ buttons to select “[on]” (display always lit) or “[oFF]” (display dark when not used).
•
Once the right mode is shown on the display, press the [ENTER] button to select it.
•
Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
Display Rotation [dISP]
Rotate the display over 180° (upside-down) or not.
•
Press the [MENU] and
▲/▼ buttons until the display shows “
dISP
”.
•
Press the [ENTER] button.
•
Use
▼ and ▲ buttons to select “
[no]
” (normal display always lit) or “
[YES]
” (display upside-down).
•
Once the right position is shown on the display, press the [ENTER] button to select it.
•
Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
Auto Test [tESt]
Used to activate the internal “self-test” program which checks all possibilities of the unit.
•
Press the [MENU] and
▲/▼ buttons until the display shows “
[tESt]
”.
•
Press the [ENTER] button to start the internal self-test program.
•
To go back to the functions press the [MENU] button for about 2 seconds.
Temperature inside the unit [tEMP]
Used to show the temperature inside the unit
•
Press the [MENU] and
▲/▼ buttons until the display shows “
[tEMP]
”.
•
Press the [ENTER] button to show the internal LED temperature of the unit on the display.
•
To go back to the functions press the [MENU] button again.
If you want to go back to normal running mode: press the [MENU] button for about 2 seconds.
Fixture Time [FhrS]
Used to show the number of working hours of the unit.
•
Press the [MENU] and
▲/▼ buttons until the display shows “
[FhrS]
”.
•
Press the [ENTER] button to show the number of working hours in the display.
•
To go back to the functions press the [MENU] button.
Reset [rESt]
Used to force a reset of the unit.
•
Press the [MENU] and
▲/▼ buttons until the display shows “
rESt
”.
•
Press the [ENTER] button to reset the unit.
REMARK: also check the chapter about the DMX-channel configuration of the unit to find out how you can
force a reset by DMX.
OFFSET MENU:
Used to adjust the home position of several functions: offset parameters for PAN, TILT, COLORS,
GOBOS and light output.
If you’re not already in the setup menu, just press the [MENU] button shortly to enter the setup menu.
•
Now press the [ENTER] button for about 2 seconds to go into offset mode.
•
Use
▼ and ▲ buttons to select the function you want to adjust : [PAN], [TILT], [Colo], [Gobo] and [5Ch]
•
[EPAN] : adjustable from -127 to 127
•
[ETILT] : adjustable from -127 to 127
•
[Colo] : adjustable from -127 to 127
•
[Gobo] : adjustable from -127 to 127
•
[5Ch] : adjustable from 128 to 255 (is light output)
•
Press the [ENTER] button.
•
Use
▼ and ▲ buttons to adjust the home position
•
Press the [ENTER] button to select your setting.
•
Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.