ENGLISH
USER MANUAL
JB SYSTEMS
®
3/12
CLUBSPOT
OVERHEAD RIGGING
•
Important:
The installation must be
carried out by qualified service personal
only. Improper installation can result in
serious
injuries
and/or
damage
to
property. Overhead rigging requires
extensive experience! Working load limits
should be respected, certified installation
materials should be used, the installed
device should be inspected regularly for
safety.
•
Make sure the area below the installation
place is free from unwanted persons during
rigging, de-rigging and servicing.
•
Locate the fixture in a well ventilated spot, far
away from any flammable materials and/or
liquids. The fixture must be fixed
at least
50cm
from surrounding walls.
•
The device should be installed out of reach of
people and outside areas where persons
may walk by or be seated.
•
Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s
weight.
•
Always use a certified safety cable (number 3 on the picture) that can hold 12 times the weight of the
device when installing the unit. This secondary safety attachment should be installed in a way that no part
of the installation can drop more than 20cm if the main attachment fails.
•
The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
•
Don’t cover any ventilation openings as this may result in overheating.
•
The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
HOW TO SET UP THE UNIT
FRONT + BACK PANEL:
1. [MASTER]
: This LED lits when the CLUBSPOT is in Master mode.
2. M-DMX INPUT
:
Please note that this USB-connector is
NOT
used for updates or to connect the unit
to a
PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the
(optional) WTR-DMX DONGLE from BRITEQ
®
and you will get wireless DMX! Moreover you will be able
to connect other DMX-controlled equipment to the DMX-output so you can share the wireless DMX
function with all connected units! No extra settings to be made in the setup menu, just follow the
procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ
®
. The separate
WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645)
3. [SOUND]:
This LED reacts to the audio when the CLUBSPOT is in sound mode.
4. [MENU]:
press this button to go back to the main menu or to leave submenus.