JB Systems CLUBSPOT, Operation Manuals, Page: 13 / 16

ENGLISH USER MANUAL
JB SYSTEMS ® 11/12 CLUBSPOT
016-023 Gobo 2
024-031 Gobo 3
032-039 Gobo 4
039-047 Gobo 5
048-055 Gobo 6
056-063 Gobo 7
064-071
Shaking gobos
Shaking open (white) slow->fast
072-079 Shaking gobo 1 (slow->fast)
080-087 Shaking gobo 2 (slow->fast)
088-095 Shaking gobo 3 (slow->fast)
096-103 Shaking gobo 4 (slow->fast)
104-111 Shaking gobo 5 (slow->fast)
112-119 Shaking gobo 6 (slow->fast)
120-127 Shaking gobo 7 (slow->fast)
128-191
Rainbow
Slow -> fast
192-255
Rainbow reverse
Slow -> fast
10
000-127 No function Open (white)
128-255 Programs Sound controlled
11
000-254 Speed Slow -> fast
255 RESET Reset fixture (after 3s)
MAINTENANCE
•
Make sure the area below the installation place is free from unwanted persons during servicing.
•
Switch off the unit, unplug the mains cable and wait until the unit is cooled down.
During inspection the following points should be checked:
•
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
•
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
•
When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
•
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
•
In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
•
The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
•
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics.
•
Clean with a soft cloth using normal glass cleaning products.
•
Always dry the parts carefully.
•
Clean the external optics at least once every 30 days.
•
Clean the internal optics at least every 90 days.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!