ENGLISH
USER MANUAL
JB SYSTEMS®
7/12
USB PARTYSET
•
You can now change the DMX mode
•
Use the [UP/DOWN] buttons to select the desired DMX-mode. (4CH, 7CH or 34CH)
•
Press the [ENTER] button to confirm your choice.
•
Now you can use the [UP/DOWN] buttons to set the DMX address. [dxxx]
•
Press the [ENTER] button to confirm your choice.
Note:
the display blinks when the unit is in DMX-mode and no DMX-signal is detected.
Some more information on DMX512:
The DMX-protocol is a widely used high speed signal to control intelligent light
equipment. You need to “daisy chain” your DMX controller and all the connected light
effects with a good quality XLR M/F balanced cable. To prevent strange behavior of the
light effects, due to interferences, you must use a 9
0Ω to 120Ω terminator at the end of
the chain. Never use Y-
splitter cables, this simply won’t work!
Each effect in the chain needs to have its proper starting address so it knows which commands from the
controller it has to decode.
4 CHANNEL DMX-CONFIGURATION:
DMX
Channel
DMX-
value
function
remarks
1
000-009
Blackout
010-029
AM01
Mixed Automatic Shows
030-059
AM02
060-089
AM03
090-129
AP01
– AP18
Automatic Program 01
– 18 (use Channel 2)
128-159
SM01
Mixed Sound Shows
160-189
SM02
190-209
SM03
210-255
SP01
– SP18
Sound Program 01 - 18 (use Channel 2)
2
000-013
AP01 / SP01
Select select a specific program
Channel 1
between 090 and 129
= Auto mode
Ch 1
between 210 and 255 =
Sound Mode
014-027
AP02 / SP02
028-041
AP03 / SP03
042-055
AP04 / SP04
056-069
AP05 / SP05
070-083
AP06 / SP06
084-097
AP07 / SP07
098-111
AP08 / SP08
112-125
AP09 / SP09
126-139
AP10 / SP10
140-153
AP11 / PS11
154-167
AP12 / SP12
168-181
AP13 / SP13
182-195
AP14 / SP14
196-209
AP15 / SP15
210-223
AP16 / SP16
224-237
AP17 / SP17
238-255
AP18 / SP18
3
000-255
Auto Program Speed
Slow to Fast
4
000
Full ON
General Dimmer
001-255
Dimmer