ENGLISH
USER MANUAL
JB SYSTEMS®
3/12
USB PARTYSET
Important:
Never look directly into the light source! Don’t use the effect in the presence of persons suffering
from epilepsy.
TRANSPORT:
ALWAYS DISCONNECT THE USB CABLES BEFORE YOU PUT THE SET IN THE
TRANSPORT BAG AND BEFORE TRANSPORT
DESCRIPTION:
1. RGBW DERBY PROJECTOR
2. RGBW PROJECTOR
3. USB C CONNECTOR:
connect the USB cables from the bar to each Derby and Par projector. These
cables will provide power and data the bar to the projectors.
Important:
Always disconnect these cables for transport
4. MODE SWITCH:
it is possible to use a projector without the bar. All you have to do is to power the unit
via an (optional) USB C cable and a (optional) power adapter (5V-2A) or power bank. Once the unit is
powered, you can select the working mode via this switch:
•
CLOSE = OFF
•
AUTO = Automatic mode
•
SOUND = Sound controlled mode
5. POLE STAND ADAPTER:
used to fix the bar on the supplied light stand
6. SCREW:
can be used to fix an additional USB projector to the bar.
7. EXTRA USB CONNECTOR:
2
extra projectors from our USB range can be powered and controlled via
these extra USB connectors. (JB Systems USB LASER, USB MUSHROOM, USB DERBY, USB PAR
…)
8. CONTROL PANEL:
Used to select the different functions of the bar, see further to learn how to operate
the unit.
9. DISPLAY:
shows all the necessary information about settings and working modes.
10. INTERNAL MICROPHONE:
The built-in microphone is used to synchronize the sound controlled shows
to the beat of the music.
11. DMX OUTPUT:
3pin female XLR-connector used to connect the USB Bar with the next unit in the DMX
chain.
12. DMX INPUT:
3pin male XLR-connector used to connect universal DMX-cables. This input receives
instructions from a DMX-controller (in DMX mode) or from the previous bar (in Master/Slave mode).
13. M-DMX INPUT:
Please note that this USB-connector is NOT used for updates or to connect the unit to a
PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the
(optional) WTR-DMX DONGLE from BRITEQ
®
and you will get wireless DMX! Moreover you will be able
to connect other DMX-controlled equipment to the DMX-output so you can share the wireless DMX
function with all connected units! No extra settings to be made in the setup menu, just follow the
