12
2.9 Deleting the last photos saved to memory
Press the MODE button until the LCD screen displays the icon "delete last photo
taken" and then press the shutter button to validate. The last photo captured will
be deleted. If last photo was taken in continuous shooting mode then the whole
group of photos will be deleted.
2.10 Modifying resolution "LO"
’
When you need to take many photos in one session you can choose "low
resolution" mode. Press the MODE button until the LCD screen displays the
symbol "LO" and then press the shutter button to confirm. If you want to change
back into "high-resolution" mode, press the MODE button until the LCD screen
displays the symbol "HI" and then press the shutter button to confirm.
2.11 Modify the compression mode
Press the MODE button until the LCD screen displays
“
Hd
”
and then press the
shutter button to confirm.
Note: Sometimes the actual number of photos that will be displayed and that can
be captured in low & compression modes may be different depending on the
actual scene and background conditions.
2.12 Modifying frequency
Modify the
“
anti-flicker
”
frequency if needed when you take photos indoors with
fluorescent lighting. Frequency is set by default to 60Hz (suitable for North
American household AC power). Press the MODE button until the LCD screen
displays the "anti-flicker" mode (50 / 60) and then press the shutter button to
confirm selection.
3. Installation and Utilization of the software program
Insert the CD in your CD-ROM drive, and the application will run automatically.
An interface will appear. On the left of the interface there are four buttons.
Summary of Contents for jdc230
Page 1: ......
