MEC2 - TROUBLESHOOTING GUIDE
MEC2
www.jaypro.com / (800) 243-0533 / 976 Hartford Tpke, Waterford, CT 06385 USA
SUBJECT TO CHANGES IN DESIGN AND MANUFACTURING
© COPYRIGHT 2019 JAYPRO SPORTS, LLC. ALL RIGHTS RESERVED
Sheet 2 of 7
IMPORTANT NOTES & INFORMATION:
*CAUTION* JAYPRO RECOMMENDS ALL WORK TO BE COMPLETED BY A QUALIFIED ELECTRICIAN. ACCESSING THE MEC2
RELAY PANELS INTRODUCES ELECTRICAL HAZARDS AND CAUTION MUST BE TAKEN TO PREVENT INJURY OR DAMAGE TO
THE EQUIPMENT.
1. It is the Electrician's responsibility to ensure the relays have been programmed properly.
2. It is the Dealer's responsibility to ensure the customer has been properly trained on the MEC2 system.
3. Before any work outlined in this manual is done on the MEC2 system, the individual completing this work must have
a good, working knowledge of the MEC2 system. If you are not familiar with the programming side of the MEC2, do
not complete any work outlined in this manual.
4. It must be verified that the MEC2 touchscreen has been programmed properly before any work is completed.
Refer to the MEC2 installation manual and electrical set-up instructions for further information.
5. Read this manual in it's entirety and consult Jaypro Sports with any additional questions.
6. Jaypro is not responsible for any damage that is done to the MEC2 system when the proper precautions are not
followed.
MEC2 NOMENCLATURE:
The following is a basic overview of the MEC2 Relay Boards. The system displays a main relay board and an
expansion relay board. Each facility has a it's own configuration which may look different than the one below.
