Rev: E
Page
7
of
8
Install Net:
Lay the net sections out lengthwise along the base of the poles. Attach D-Rings to the net
at each intermediate pole location. Attach the hoisting ropes to each cable end and D-
Ring. Slowly raise the net up, attaching the sliding cable loops to the net approximately
every 5 ft. While raising the net, attach any net sections together using cable ties located
about 12” o.c.
Once the net is fully raised, secure the bottom edge of net to each pole as shown in Figure 7.
MAINTENANCE:
5/16” x 3 1/8”
SNAP HOOK
(ATTACH EVERY 5 FT)
5/16” x 3 1/8” SNAP HOOK
ATTACH TO CABLE LOOPS
END OF JOISTING ROPE
TIE KNOT TO 5/16” x 3 1/8”
SNAP HOOK
ATTACH 5/16” x 3 1/8” SNAP
HOOK TO D-RING & CABLE
CLAMPS TO AIRCRAFT CABLE
END POLES
INTERMEDIATE POLES
END POLES
5/16” x 3 1/8” SNAP HOOK
(ATTACH TO CABLE LOOPS)
INTERMEDIATE POLES
5/16” x 3 1/8” SNAP HOOK
(ATTACH TO AIRCRAFT CABLE)
Figure 7
