Jayco JAY SPORT 2018, Owner'S Manual, Page: 68 / 145

Section 4: Vehicle Operation
60
5. To avoid damaging the valance, when securing the bottom of the entrance door, insure
the door valance is placed between the door and the ceiling.
6.
If your unit is equipped with a kitchen flip-top, put it into the travel position
before lowering the roof. Failure to do so can result in roof damage and prevent
the roof from lowering properly.
7. Make sure bed slides are not
obstructed. Return all fixtures
and loose items to their stowed
position.
Step 2 -
Pull the fabric flaps loose covering the 4 lifter
posts and tuck them behind the metal posts. Unsnap
the two metal safety covers (on opposite corners) from
the lifter posts (
A
), and place them together; store them
under the front bed mat.
Step 3 -
Remove the screen door.
1. Release all Velcro from around the door.
2. Release the dead bolts at the top of the door.
3. Release the 4 plastic clips on the door at the bottom.
4. Lift the door out of the threshold, turn it at 45° angle and lift
the door out of the opening.
5. Slide the door on the cables up in position at the ceiling resting
the bottom of door on the bracket above the door opening.
6. Secure the door bottom to the small bracket by turning the
clip
Secure the top of the door to the ceiling with 2 fabric straps.
Step 4 - Flip the bed flaps back underneath the mattress on
each bed (arrow).
Table of Contents Maintenance Record