Jayco JAY SPORT 2018, Owner'S Manual

Page: 48 / 145

Section 4: Vehicle Operation
40
It is extremely important to keep the master cylinder full at all times. An empty cylinder
invites moisture.
Disc Brakes (if so equipped)
If your RV is equipped with disc brakes, see the manufacturer’s owner’s manual for detailed
safety and maintenance information.
Towing Behind Your RV
If you do not have a
Jayco factory installed hitch receiver
, towing items
behind your Jayco RV, or overloading the rear, will void the warranty and
may result in: damage to the RV or add-on items, towing difficulties, property
damage and/or personal injury.

NOTE:IF YOU DO NOT HAVE A JAYCO FACTORY
INSTALLED HITCH RECEIVER, DO NOT TOW
ANYTHING BEHIND YOUR RV. THE RV FRAME AND
BUMPER ARE NOT DESIGNED FOR TOWING.
NOTE: A hitch equipped for trailer towing will have tabs to hang the
safety chains and there will be a bracket for the trailer wiring plug.
There should also be a label on the hitch stating maximum towing
capacity.
Entrance Door Step(s)
Make sure your entrance step is fully extended
before exiting the vehicle, and retracted prior to
towing.
Lubricating the step mechanism
Carefully clean the area around the pivot points (the
rivets involved in the motion of the mechanism).
Lubricate these pivot points with an automotive grade,
non-staining lubricant every 30 to 60 days.
Wipe any excess lubricant off of the step and then clean
the entire step after lubricating.
Step Light
Your RV may be equipped with a switch located on the skirt (in front of the steps) which
operates a light located under the step assembly.
Entrance Door
Always hold onto the entrance door when opening or closing it. Damage caused because
you failed to do so is not covered by the
Limited Warranty.
Table of Contents Maintenance Record