Bedroom
1. Remove all objects left between the slideout and cabinetry.
2. Lift the end of the mattress and fold over the end of the plywood on the bed base at the hinge.
(Fig. 3-8)
3. Press the “In” button on the control switch (Fig. 3-5) to bring the room in and hold it until the
motor stops - travel time is approx. 25 seconds. As the end of the mattress gets close to the
cabinet, lift up on the mattress to position it above the cabinet. When stored, the mattress
will rest on top of the cabinet. (Fig. 3-9)
4. Release the button.
5. Install the transit bar (Fig. 3-3) in the proper location as indicated on the wall.
#
CAUTION: IMPORTANT! Never store slideout without the transit bars installed. This
helps seal the slideout in the closed position.
10
Cove Owner’s Manual
Fig. 3-8
Fig. 3-9