How to recharge your device with MB3615
Most 5V devices can be charged: eg. mobile phones, PDA, tablets, Bluetooth headsets, MP3 players, and some models of digital cameras can be recharged
This can be achieved by using either the connectors supplied with MB3615 or the USB cable supplied with your device.
There are 2 x USB charging ports on MB3615, so that devices can be charged simultaneously.
*Make sure the internal battery of MB3615 is fully charged.
* The battery charge level can be checked by pressing the ON/OFF button briefly, there are 3 blue LEDs to indicate the
charge level (low, medium, high)
*You can use either the charging cable supplied with MB3615 (changeable connectors included) or by using the
original USB charging cable supplied with your device
*Plug in the USB cable into one of the USB output ports
*Press the ON/OFF key once to switch on your MB3615 Power: Charging will start automatically after a few seconds and you can see it from the charging
indicator on your device. It is normal that the LED lights of the MB3615 do no light on while charging your device for power management optimization.
When your device is fully charged or disconnected, MB3615 will automatically switch off.
How to use the LED Flashlight
Just press 5 seconds on the ON/OFF key to switch on the LED Flashlight
Technical Specifications
• Battery Capacity: 4000 mAh, Li-Polymer
• Rated input: 5 V= 800 mA
• Solar panel: 5V = 320 mA Max (optimum conditions)
• Rated output: 5 V = 2.1A Max
• Working temperature: 0º C – 45º C
• Net weight: 162 g
Safety features: Over-charging, short-circuit and over-discharging protection
Distributed by: TechBrands by Electus Distribution Pty Ltd
320 Victoria Rd Rydalmere NSW 2116 Australia
