LA-5174 Solar Wireless Door Announcer
A
A
B
Solar Wireless PIR
CAUTION:
The wireless PIR motion detector should be installed indoors or under a shelter
when placed outdoors.
The PIR
should not be mounted near to large metal objects or on metal surfaces. It needs to be
mounted on a wall or in a corner at a height of approximately 2-2.5m for the best coverage. Do
not site a PIR where its field of view may be obstructed (e.g. by curtains). Also note that PIR
work best when sensing movement across rather than along their detection beams.
The detector has been designed to avoid false alarms, nevertheless, it is best to avoid facing
sources of heat such as fires and boilers, and always try to keep away from a window. A PIR can
look face a radiator but should not be positioned above one. In some cases, the movement of
animals may also be detected. To overcome this it is recommended that the pets are kept out
of sight of the PIR.
Mounting the PIR
Step 1:
Remove and retain the screw from the bottom of the PIR and lift off the cover.
Step 2:
If you are fitting the PIR in a corner, use mounting
points ”A”, if you are fitting the detector on to a flat surface
use mounting points “B” – the mounting points are shown by
indentations in the plastic molding. Use a small drill to create
two fixing holes at the mounting points.
Step 3:
Hold the base of the PIR in the chosen position, ensuring that the front of PIR will face
towards the centre of the protected area, and mark and drill two 5mm fixing holes in the wall.
DO NOT drill holes with the PIR in position – the resulting dust may damage the unit. Secure
the PIR to the wall using two screws (25mm countersink) and the wall plugs.
Step 4:
Replace the electronic module into the retaining clips, ensuring that it is correctly
positioned and firmly seated.
Step 5:
Install 2 pcs. AAA rechargeable batteries (not
included) into the battery snap in correct polarity.
Replace PIR cover and refit retaining screw.
Step 6:
Plug-in the Solar Panel into the Wireless PIR
for charging the batteries.
-VE
+VE
