background image

                                                                                                      LA-5174  Solar  Wireless  Door  Announcer 

LA-5174 Solar Wireless Door Announcer 

 

Introduction 

 

The  LA-5174  is  based  on  the  advanced  wireless  and  solar  cell  technology  that  the  door 

announcer gives alert signal for anyone approaching the area monitored by the solar wireless 

PIR. All visitors will be effectively detected. It is easy to set up and simple to use. 

 

Please read this manual carefully before commencing installation. 

 

Contents 

Wireless Door Announcer x 1 

The unit receives signals from the PIR and gives 

off alert signal. 

 

 

 

 

Solar Wireless PIR Motion Detector x 1 

It detects body heat of a moving object. (more 

than one set can be linked to the Wireless Door   

Announcer.) 

 

 

 

Solar panel x 1   

It is used to charge the rechargeable batteries for the Solar   

Wireless PIR. When the Wireless PIR is connected to   

the Solar Panel, the battery of the Wireless PIR will   

last longer 

 

Remarks : 

Batteries are not included in the kit

 

 

Tools Required 

 

Large and small flat bladed screwdrivers 

 

Large and small cross-point screwdrivers   

 

Hammer   

 

Ladder or other safe working platform 

Please Note: Tools are not included, consult a professional if you need assistance     

 

Summary of Contents for LA-5174

Page 1: ...t receives signals from the PIR and gives off alert signal Solar Wireless PIR Motion Detector x 1 It detects body heat of a moving object more than one set can be linked to the Wireless Door Announcer Solar panel x 1 It is used to charge the rechargeable batteries for the Solar Wireless PIR When the Wireless PIR is connected to the Solar Panel the battery of the Wireless PIR will last longer Remar...

Page 2: ...pposite side of the wall Avoid any location which is near within 60cm to these or any other large metal objects Installation Wireless Door Announcer CAUTION When positioning the door announcer ensure that it is located in a dry place away from damp areas Step 1 Unscrew and retain the holding screw from front cover Remove the front cover s from the base assembly Step 2 Place 4 x 1 5V D Cell Alkalin...

Page 3: ...sight of the PIR Mounting the PIR Step 1 Remove and retain the screw from the bottom of the PIR and lift off the cover Step 2 If you are fitting the PIR in a corner use mounting points A if you are fitting the detector on to a flat surface use mounting points B the mounting points are shown by indentations in the plastic molding Use a small drill to create two fixing holes at the mounting points S...

Page 4: ...ors once every 3 months 2 It is suggested to replace all batteries in the door announcer once a year 3 It is suggested to replace all batteries in the PIR once every two years Specification Wireless Door Announcer Type Microprocessor based control unit Housing ABS Radio System 433MHz Coverage Range 100m Power Supply 4 X 1 5V D Cell Alkaline Battery not included Temperature 0 40 Solar Wireless PIR ...

Reviews: