The Li-polymer charger has two independent
charging socket for charging two batteries
at the same time. USB power source can be
from a computer or a mains USB charger.
Off
9. Pairing the remote control and plane
Plug in the Li-polymer battery into the plane.
The airplane indicator now flashes.
Push and hold the throttle stick to
the bottom.
Turn on the the remote control and wait
for the beep sound. After the beep sound
finishes, the plane’s indicator will remain
solid.
After the completion of the pairing, rudder and
elevator should return to netural position.
Manually return the rudder and elevator to neutral
position if needed.
Push or pull to manually
return rudder/elevator to neutral
Do NOT run the motor without having the propeller attached to avoid damage to the motor.
After the pairing, make sure both the rudder and elevator
are in neutral (middle) position.
Place the aircraft on a flat surface and ideally facing the
wind.
Push the throttle stick to accelerate. When the plane
reaches a high speed, pull the direction button
downwards a little to lift off the plane.
Take off from ground
