Tools Required
Large and small flat bladed screwdrivers
Large and small cross-point screwdrivers
Hammer
Please Note: Tools are not included, consult a professional if you need assistance
Installation
Solar LED LIGHT WITH PIR
Step 1: Remove and retain the screw from the bottom
of the solar LED light with PIR and lift off the cover.
Step 2: Use a small drill to create four fixing holes
at the mounting points.
Step 3: Hold the base of the solar LED light with PIR
in the chosen position, ensuring that the front of PIR
will face towards the centre of the protected area,
and mark and drill four 5mm fixing holes in the wall.
DO NOT drill holes with the PIR in position –
the resulting dust may damage the unit.
Secure the PIR to the wall using two screws
(25mm countersink) and the wall plugs.
