-4-
the charging is finished. The fully charging need about 5-10 hours.
4.2
Use Solar Charging, Place the tracker in the sunlight, the solar battery will recharge the tracker
automatically, in the long distance transport or longtime tracking please install the tracker in the place with
sunlight, this can extend the battery working time, but it is impossible to finished fully charging only by solar
power when working.
Note:The voltage of the charger must not be higher than 5.5V. High voltage will damage the tracker.
Please use the OEM adapter, it needs 5-10 hours to charge the tracker fully. Place the tracker in the sunlight
as far as possible and it will extend the battery working time observably.
5.
Low Battery Alarm:
When the tracker battery voltage is low, the GREEN LED of the tracker will flash 3 or 4 times, and then the
tracker will send battery low information SMS to the preset phone.
Low power
Battery: 8%
6.
Back to default set (Factory configuration)
Send the SMS command to the tracker can reset to the factory configuration. The SMS command is
FACTROY*123456. Please see the detail in following description.
7.
ANTENNA
The Antenna of GSM and GPS are built in the tracker. So please leave the tracker away from big metal
that will reduce the GSM and GPS signal.
8.
Waterproof
The design of the tracker is IP56 level waterproof, it means the raining or sprinkling cannot damage the
tracker, but you cannot drop the tracker into water.
9.
Using Condition
The working temperature is -20°C to 60°C, over this range the specification cannot reach the standard
level. The storage temperature can reach to -40°C to 80°C.
Simply Using Step
1. First to buy a 2G GSM phone SIM card and enable GPRS service, order a data package 20-30M
