6
FUSION Cushion
V. MAINTENANCE & CLEANING
JAY®
MAINTENANCE & CLEANING
Monthly cleaning and regular maintenance may help extend
the life of your cushion. During cleaning, component
inspection is recommended.
Check the cover for tears and excessive wear and replace
if ripped, torn, or otherwise not fully functional. Inspect
the fluid pad for punctures or any other abnormalities.
Check the foam base to ensure foam consistency. While
checking the fluid pad, if you ever feel the fluid is firmer in
one area, simply knead the fluid back to its original
consistency and/or call your local authorized supplier.
To clean cover
1.
Remove the cover from the foam base and
turn inside out.
2.
Machine wash in warm water 60 C (140 F)
and drip or tumble dry on low heat.
No ironing required.
CAUTION
- DO NOT DRY CLEAN COVERS OR USE
INDUSTRIAL WASHERS AND DRYERS TO CLEAN
COVER. DO NOT STEAM AUTOCLAVE. DO NOT
BLEACH.
To refit cover after washing, reinstall the cover on the foam
base. Ensure the back of the cover matches up to the back
of the foam base.
NOTE
: If utilized in an industrial setting, write the
resident's name with a permanent marker on the content
label of the covers. This will help to ensure the return of
the covers after washing.
Use only JAY designed cover on JAY cushions. The
covers is an important part of allowing the immersion
into the fluid insert which redistributes the pressure.
Changing the cover will alter this design and its
efficacy.
To clean
the
fluid
insert
Remove the cover from the foam base. Remove fluid
insert from the inner cover and wipe with warm water
and soap. Rinse with a clean, damp cloth then wipe dry
with a clean cloth.
CAUTION
- NEVER SUBMERGE THE FLUID INSERT IN
ANY LIQUID.
CAUTION
- AVOID HARSH CLEANING OR ROUGH
HANDLING AS THIS MAY LEAD TO A DEGRADATION
OF THE FLUID INSERT.
If at any time, the outer cover, inner cover, foam base, fluid
insert, or any other component appears to be wearing or
you notice a degradation in the texture, contact your
supplier/Sunrise Medical for evaluation and further
instructions.
To clean the
Air Insert
(if applicable)
Reference the Air Insert Owner's Manual Supplement for
proper cleaning instructions.
If at any time, the outer cover, inner cover, foam base, or
any other component appears to be wearing or you notice
a degradation in the texture, contact your supplier/Sunrise
Medical for evaluation and further instructions.
To clean foam base
Remove the cover, fluid or air insert, and inner cover from
the foam base. Wipe lightly with a damp cloth. Do not use
soap. Do not submerge in water. Wipe off with clean cloth.
Let completely air dry before reassembly. Reinstall the
cover over the foam base. Ensure the back of the cover
matches up to the foam base.
CAUTION
- NEVER SUBMERGE THE FOAM BASE IN ANY
LIQUID.
oo
oo
121985 Rev E
(Cushion Cover) Laundry Care Symbols
Machine was in warm
water (60 C)
Only non-chlorine
bleach, when needed
Drip dry
Do not iron
Do not dry clean
o
