AAA-055-00012
Jaylor Operator’s Manual
- 40 -
Single Auger Trailer Units
TRANSPORTING
The machine is designed to be easily and conveniently moved from location to location.
When transporting, follow this procedure:
1. Be sure all bystanders are clear of the machine.
2. Be sure that the unit is hitched positively to the towing vehicle. Always use a retainer in the
drawbar pin and a safety chain between the machine and tractor.
3. Make sure the SMV (Slow Moving Vehicle) emblem and all the lights and reflectors that are
required by the local highway and transport authorities are in place, are clean, and can be
seen by all overtaking and oncoming traffic.
4. Raise the conveyor and install the transport lock bracket.
5. Do not allow riders on the machine or tractor.
6. It is not recommended that the unit be transported for long distances when the mixing
chamber is fully loaded. Transporting will compact the mixture and can make startup difficult.
7. Always use hazard flashers on the tractor when transporting unless prohibited by law.
8. It is not recommended that the machine be transported faster than 15 km/hr (10 mph).
9. Never transport faster than the road or terrain conditions will allow you to do safely.
10. Check with the local authorities on the rules and regulations governing the transporting of
agricultural equipment on highways before starting. Always comply with these ordinances
and regulations.
