AAA-055-00012
Jaylor Operator’s Manual
- 3 -
Single Auger Trailer Units
INTRODUCTION
Congratulations on your choice of a Jaylor mixer to complement your operation. This equipment
has been designed and manufactured to meet the needs of the discriminating buyer for efficient
cutting, mixing and feeding.
Safe, efficient and trouble free operation of your mixer requires that you and anyone else who will
be operating or maintaining the machine, read and understand the Safety, Operation,
Maintenance and Troubleshooting information contained within the Operator's Manual.
This manual covers the 4000 Series Single Auger Models manufactured by Jaylor. Keep this
manual readily available for reference and be sure to pass it on to new Operators or Owners.
Contact your nearest Jaylor Dealer or Distributor if you need assistance or information.
OPERATOR ORIENTATION
- The directions left, right, front, and rear, as mentioned throughout
the manual, are as seen from the tractor driver’s seat and facing forward.
POLICY STATEMENT
It is the policy of Jaylor to improve its products where it is possible and practical to do so. Jaylor
reserves the right to make changes or improvements in design and construction at any time,
without incurring the obligation to make these changes on previously manufactured units.
OWNER/OPERATOR’S RESPONSIBILITY
It is the Owner/Operator’s responsibility to read the Operator’s Manual, to operate, lubricate,
maintain, and store the product in accordance with all instructions and safety procedures. Failure
of the operator to read the Operator’s Manual is a misuse of this equipment.
Like all mechanical products, Jaylor products will require cleaning and upkeep. It is the
Owner/Operator’s responsibility to inspect the product and to have any part(s) and/or assemblies
repaired or replaced when continued operation would cause damage or excessive wear to other
components or cause a safety hazard.
It is the Owner/Operator’s responsibility to deliver the product to the authorized Jaylor Dealer or
Distributor, from whom it was purchased, for service or replacement of defective parts which are
covered by warranty. Repairs to be submitted for warranty consideration must be made within
thirty (30) days of failure. It is the Owner/Operator’s responsibility for any cost incurred by the
Dealer for traveling to or hauling of the product for the purpose of performing a warranty
obligation or inspection.
