Jay electronique ORION Series, Installation And User Technical Manual

Page: 60 / 140

Gb Fr
- 60 -
324501E
revision02
De
5- Product configuration
Before final installation and use, we recommend that you configure the units
with customized settings as detailed in steps 1 to 7. These steps must be
performed on an insulated work surface in the workshop.
) )
) )
)
5.1- Configuration steps to be respected
( ~ 10mn)
Step nb.1
* = Only for transmitter equipped with «On/Off» button
Programming new transmitter identity code
> see para 5.2
Customized association of
transmitter buttons with receiver
relays
> see para. 5.4
Interlocking of conflicting commands programming procedure
> see §5.6
Radio channel programming procedure
> see §5.7
«Dead man» function time programming procedure
> see §5.8
Proceed to the installation on site by respecting the installation
recommendations described in §6
Operating mode programming procedure for function relays
> see §5.5
Receiver pre-settings erased
> see para 5.10
Standard association of
transmitter buttons with
receiver relays: button 1 –
relay 1, button 2 – relay 2,
etc.
(Previous settings are
automatically erased)
> see para 5.3
or
Step nb.2
Step nb.3
(Optional)
Step nb.4
(Optional)
Step nb.5*
(Optional)
Step nb.6*
(Optional)
Step nb.7