Jump
- 332970D
- 31 -
DE
FR
EN
1 - General safety rules
IMPORTANT :
When installing, be sure to take account of the 100ms processing delay which
you must add to the total passive stopping time of the system. See «
Operating
principle
» section.
Before use, you must con
fi
gure the radio channel on which the repeater will
be operating. See «
Con
fi
guration
» section.
Service your equipment
and perform all the periodic checks as
may be required by the intensity with which your equipment is used.
If several « transmitter / repeater
Jump
/ receiver » systems must be installed
in the same area, it is mandatory to con
fi
gure them with different working
(receiving) frequency channels. See «
Con
fi
guration
» section.
It is essential to «learn» the identity code of the equipment with which the
repeater Jump will be used. See «
Con
fi
guration
» section.
Only use one repeater
Jump
within a «transmitter / receiver» pair, if the
transmission frequency is the same as the reception frequency.
It is possible to use several repeaters
Jump
for a «transmitter / receiver» pair.
In this case, the reception frequency and the transmission frequency of the
repeater must be different. See «
Con
fi
guration
» section.
!
!
!
!
Summary of Contents for Jump
Page 27: ...Jump 332970D 55 NOTE ...
