Jay electronique ISIS Series, Installation And User Technical Manual

Page: 89 / 156

- 89 -
ISIS
- 331260D
revision02
DE FR EN
8.2- Receiver ISR and transceiver receiver module IST
Problem Possible cause CORRECTIVE ACTION
Green indicator light
V1
does not come
on when receiver is
powered up
Power supply cables not
correctly inserted in spring
terminal strip Reconnect cables
correctly
Check fuses
F1
and
F2
on
support
Replace faulty fuses
Green indicator
light
V3
for radio
reception does
not come on when
transmitter sends
an active state
Antenna wire incorrectly connected Connect antenna wire correctly
Check that receiver (or receiver
module of transceiver nb.1)
is on same radio channel as
transmitter (or transmitter module
of transceiver nb.2)
Repeat radio channel
programming procedure
Red indicator light
V2
comes on after
power up
Jumpers
JP1
,
JP2
and
JP3
are in «short-circuit» position
Remove jumpers placed
in short-circuit position.
Relay(s) do not
activate though
indicator light
V3
is on (radio link
established)
Identity code mismatch
between
ISIS
transmitter and
receiver
Repeat transmitter-
receiver association;
see “changing product
con
fi guration” section
JP1
RM R1 R2 R3 R4
JP2 JP3
4 5 6 7 8 9 10 11 12 13 1 2 3
JP1 JP2 JP3
4 5 6 7 8 9 10 11 12 13 16 17 18 19 20 21 14 15
RM R1 R2 R3 R4 R5 R6 R7 R8
V2
V1
F1
ISRA - IST
ISRS
F2
V3
V2 V1
V3
1 2 3
F1
F2