14
MAINTENANCE INSTRUCTIONS
LUBRICATION
After running tape is used for a period of time, it must be lubricated with special methyl-silicone
oil.
1.Recommendations for Lubrication Frequency:
The Running Time
Lubrication Frequency
less than 3 hours each week
once for every 5 months
4-7 hours each week
once for every 2 months
over 7 hours each week
once each month
(Excessive lubrication is forbidden.)
Notice:
Reasonable lubrication is effective for expanding the service life of the treadmill.
2. Lubrication Method
How to confirm if the treadmill needs more lubricant?
Grab and lift the running belt and reach out your hand as close as possible to the center of the backside
of the running belt. If the running board is dry and the belt doesn't feel damp, you need to add lubricant.
Run the belt at the speed of 1KM/H in order to evenly apply the silicone grease and tap the running belt
from left to right for a few minutes so as to make sure the silicone grease fully absorbed by the running
belt.
3.Running Belt’s Elasticity Adjustment
The running belt has already been adjusted in the factory but could still become loose and slip at the
driving rod after a period time of use. Please synchronously turn the bolts on both sides of the running
belt clockwise at a half circle each time. Be careful and do not over-tighten the belt in case raising the
load of motor or spoil the motor, the running belt and the rotating rod.
4.Off-track Deviation
Possible Reasons:
1.The treadmill is placed on surface not horizontal.
2.The user's feet are not in the center of the running belt when exercising.