Jaxon ES-XT30, Instruction Manual

Page: 10 / 36

9
5. Adjust the motor depth
Steady the motor shaft and set the depth collar to a desired position then secure it. Loosen the
steering tension screw and deploy the motor carefully (picture 13).
picture 13
Trouble shooting and solving method
1. Motor fails to run or lack of power
- Check battery connections and cable for proper polarity
- Make sure terminals are clean and corrosion free. Use fine sandpaper or emery cloth to clean
both terminals.
- Check battery ware level. Add water if needed.
- Check propeller for line or weeds. Please detach and clean up the propeller. (WARNING:
make sure the motor is disconnected from the battery).
2. Motor loses power after a short running time:
- Check battery charge, if low, restore to full charge.
3. Motor is hard to steer.
- Loosen the steering tension knob on the bracket.
- Lubricate the steel shaft.
4. Motor vibration
- Disconnect the battery.
- Make sure the propeller is installed properly.
- Inspect the propeller and the drive pin conditions, replace it if necessary.
- Examine it by turning the propeller manually, motor shall turn freely with a slight magnetic
drag. Internal damage might occur if motor is blocked or locked. Stop use it and contact our
service.
For all other malfunctions not listed above, please contact customer service center.