13
dips,
and
fluctuations
of
input
power
supply line IEC
61000-4-11
(>95 % dip in
U
T)
for 0,5 cycle
40 %
U
T
(60 % dip in
U
T)
for 5 cycles
70 %
U
T
(30 % dip in
U
T)
for 25 cycles
<5 %
U
T
(>95 % dip in
U
T)
for 5 sec
(>95 % dip in
U
T)
for 0,5 cycle
40 %
U
T
(60 % dip in
U
T)
for 5 cycles
70 %
U
T
(30 % dip in
U
T)
for 25 cycles
<5 %
U
T
(>95 % dip in
U
T)
for 5 sec
of a typical commercial or hospital
environment. If the user of the EX
PLUS 1300 requires continued
operation
during
power
mains
interruptions, it is recommended that
the EX PLUS 1300 be powered from
an uninterruptible power supply or a
battery.
Magnetic field of
commercial
frequency
(50/60Hz)
IEC 61000-4-8
3 A/m
3 A/m
Power frequency magnetic fields
should be at levels characteristic of
a typical location in a typical
commercial or hospital environment.
Note
U
T is the a.c. mains voltage prior to application of the test level.
3) Guidance and manufacturer’s declaration – electromagnetic immunity 2
The EX PLUS 1300 is intended for use in the electromagnetic environment specified below. The
customer or the user of the EX PLUS 1300 should assure that it is used in such an environment.
Immunity test
IEC 60601 test level
Compliance
level
Electromagnetic
environment-
guidance
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
3 Vrms
150 kHz to 80 MHz
3 V/m
80 MHz to 2,5 GHz
3 Vrms
3 V/m
Portable
and
mobile
RF
communications equipment should be
used no closer to any part of the EX
PLUS 1300, including cables, than the
recommended separation distance
calculated
from
the
equation
applicable to the frequency of the
transmitter.
Recommended separation distance
d =
1.2
d =
1.2
80 MHz to 900 MHz
