21
Rev. 1.1
4.1
Cleaning System
Your J320i printer includes a simple cleaning system using the pre-saturated
cleaning cards provided. The regular use of these cards will clean and maintain
important parts of your printer: including the printhead, and transport rollers.
CLEAN PRINTER
WHEN TO CLEAN
When LCD screen reports message.
HOW TO CLEAN
1.
Leave power on.
Open cover and release printhead bracket
to remove ribbon
2.
Remove any normal cards from the card cartridge.
Insert one pre-saturated cleaning card (provided)
through slot on the rear of the card cartridge.
Close the printhead bracket.
Close the cover.
3.
Press the right panel button for a few seconds.
The card will feed into printer and carry out the
cleaning process.
Repeat the process with a new cleaning card
if necessary.
Note:
For a printer cleaning prior to the WHEN TO CLEAN signal, press the left panel button
until the LCD screen shows "CLEANING MENU". Press the right panel button to select and
one more time again to run the cleaning process (Repeat first steps 1 & 2 above).
Although the CLEAN PRINTER message is displayed until the
cleaning process has been performed, the printer will continue
to operate.
CLEANING
Quick Start
Getting
Started
Operation
Starting to
Print Cards
Cleaning
Trouble
Shooting
Technical
Specifications
General
Information
