4.
Card cleaning cartridge
Remove the card cleaning cartridge from the card cleaning kit.
Lift the small lid of the cartridge and remove the white
adhesive roller.
Gently peel off the wrapper and replace back into the cartridge.
Avoid touching the roller surface.
Close cartridge lid and install into printer - behind the card entry
slot - by gently squeezing the two clips.
5.
Loading ribbon cartridge
Peel off protective wrapper by gently pulling on the tape.
Insert the ribbon cartridge so the gears on the ends of the
rollers fit into the appropriate slots.
Close the printer lid and push down until you hear an audible click.
6.
Starting to print cards
Install the Windows driver on your PC, connect the interface cable
and switch on the printer when prompted.
Insert card into slot for printing.
Card will exit from slot after printing.
3
