Figure 23
Figure 22
In Stake prepare screen (
Figure 21
) click GNSS.
Stake by GNSS performs RTK and other tasks as
explained in other documents (
Figure 22
). Show/hide
the inner white buttons are available in here too.
Hold the “Back” button, and similar to the white inner
buttons, customize the main buttons that are high-
lighted. By customizing the main buttons, you may not
need for inner white buttons so to have wider screen
for viewing points.
Stake by GNSS
Figure 21
This is a fast way to stake. Select your stake point in and click “J-Mate Aim” in Figure 21. J-Mate will aim
at your target and screen of Figure 23 appears. Follow the laser with a large white paper and observe the
Distance to Target
.
When you reach your target, stake it and then survey it.
The “Next” and “Prev” buttons prepares the J-Mate to aim to the previous or next stake point.
Stake by J-Mate Aim
Distance to Target
Figure 24
In Stake with J-Mate remote, you select the stake
point in the prepare screen and J-Mate will find you,
follow you and guide you to the stake point.
In walking towards the stake point, go in small steps
not to get out of the camera view quickly and allow a
fraction of time for the camera to follow your step.
J-Mate also measures the distance to the Target
optically, and shows distance and tilt on top and the
bottom of the J-Target image.
Stake by J-Mate Remote
(
Figure 15
)
