White buttons explanation
1. Overall Statistics
•
Accept/Reject Statistics:
It shows A/B in first line and C/D in the second line. A: Number of
Accepted points. B: Number of Rejected points. C: Number of points not validated (if validate
is selected.) D: Number of points rejected because of too many epochs outside the Confi
-
dence Guard. Clicking this button clears the statistics.
• RTK Statistics:
Goes to a screen which shows Epoch by Epoch statistics during data collec-
tion, or statistics of all epochs for a collected point or before Accept/Reject. This can also be
accessed via the point list by clicking the blue pane of the point list. Clicking the up naviga-
tion button shows the points that are close to this point.
• Recording Statistics:
Shows number of points with recorded data.
•
Verify Statistics:
Number of Step One restarts, number of groups, number of rejected ep-
ochs that fall outside of the confidence guard during Step 2, if Verify with Reset is selected).
2. Point info: Codes/Attributes/Pages
• Attributes:
Shows Code attributes. Click it to get to the Code Attribute selection screen.
• Code:
Click to select the code for the points.
• Page:
Click to select the page.
• Point Description:
Shows point description. Click to change.
• Point Name:
Shows point name. Click to change.
•
Point Symbol:
Shows point symbol. Symbols should be imported first as AutoCAD Blocks,
Icons or PNG images.
• Shape Tag:
Click to change the shape tag.
3. Audio/Video/Recording/Sounds
• Audio Record:
Click it to set the amount of time that microphone opens automatically at the
beginning of each point collection and audio file gets attached to the point.
• GNSS Recording:
Click to enable recording raw GNSS data, select recording media, and
type of data (for each point or continuous.)
• Photo Record:
Shows the status of photo recording at surveying. Switch status from red
cross to green check mark if photo was shot at survey.
• J-Tip Sound:
Click to select sounds for the J-Tip.
4. Setup/Margins
• Azimuth/Bearing:
Click to toggle to show angles in Azimuth or Bearing format.
• Base Guard:
Click to set the conditions for alarming the base movement and the check box
to activate it.
• Base Ref. Frame:
Click to set the Base Reference Frame.
•
Coord. System:
Shows current coordinate system.
• Signals:
Click to select GNSS signals to track.
•
Recall Profile:
Open Action profiles screen where you can recall profile with different set
-
tings
• AntH:
Shows current antenna height and type (slant or vertical)
5. Screen, displays, links
• RTK Charts:
Shows RTK horizontal and vertical epochs.
• Rotate CCW:
Rotate the map counter clockwise by two degrees.
• Rotate CW:
Rotate map clockwise by two degrees.
• Map Zoom in:
Click to zoom in
• Map Zoom out:
Click to zoom out
• Autoscale:
Switches Map scale relative to receiver position and distances to current points
• Camera:
Activate TLS cameras. Click to switch to front and bottom cameras.
