Page
17
of
35
3.5. Wi-Fi Connection
To establish a Wi-Fi connection to the receiver:
•
Connect the device to PC using Netview&Modem.
•
Go to section Parameters
Connections
WLAN.
•
At mode line drop-down list, select mode type and confirm action for rebooting device (if
needed).
•
For connecting to the TRIUMPH-3NR (Server mode) use the corresponding block of
parameters with SSID and password data. Connect to the unit using external Wi-Fi
device.
•
For connecting the TRIUMPH-3NR (Client mode) use the corresponding block of
parameters with SSID and password data. Fill in the SSID and password of working
WLAN network.
For more details, please see the Netview&Modem User Manual.
3.6. Connecting to an External UHF Modem
The TRIUMPH-3NR does not have an internal UHF modem, but it is possible to send and
receive data by UHF using an external UHF modem.
For example, it is possible to use any JAVAD HPT***BT modem and connect it to the device
using Bluetooth:
•
Connect the device to PC using Netview&Modem (any connection type except
Bluetooth).
•
Prepare the external modem – connect it to the power supply and connect it to the
Netview&Modem.
•
Turn Bluetooth on for both external modem and receiver if needed.
•
Connect the receiver to the external modem using Bluetooth SPP connection.
•
In Receiver application of Netview&Modem go to section Parameters
Ports
UHF
and set the mode of UHF device as needed, depending on Rover or Base configuration.
