Page
10
of
26
2. Port Connections
2.1. USB
The USB cable (P/N: 14-578156-01) supports a connection of any USB 2.0 (high speed) type
level cable and above. The USB cable provides a connection from the TRIUMPH-1M Plus to a
PC (or any other device with USB connection support). It is possible to establish other
connection types using virtual connection ports where physically it will remain the USB cable:
•
Serial (COM) port A (for Windows OS devices).
•
Serial (COM) port B (for Linux OS devices).
•
Ethernet (Ethernet over USB protocol).
For NetView&Modem on a Linux OS, the default connection type is serial (COM – Serial A/B).
The physical parameters of the connection types are all via the USB connection.
2.2. Bluetooth
The TRIUMPH-1M Plus can establish a Bluetooth connection via Serial Port or PAN Profile. To
turn on Bluetooth, use NetView&Modem:
•
Pair the TRIUMPH-1M Plus to PC.
•
Connect NetView&Modem to TRIUMPH-1M Plus using the assigned Serial (COM) port.
•
Go to the Parameters – Ports – Bluetooth section in NetView&Modem.
•
At the Mode dropdown, select ‘ON’.
•
Press OK to reboot the device with Bluetooth on.
The device has two Bluetooth serial ports (A and B). Each port can have modes selected (which
port uses the connection) separately or automatically (if both ports are on). To connect external
Bluetooth devices to the TRIUMPH-1M Plus, perform the following steps:
•
Establish or review Bluetooth identification and password.
•
On the external device, find the TRIUMPH-1M Plus ID in listed devices and select it.
•
Enter password and connect.
To establish a PAN connection, first connect to the device and use the function ‘internet access’
on the external device. The TRIUMPH-1M Plus will generate an IP address for the external
device.
2.3. Wi-Fi
To establish a Wi-Fi connection to the TRIUMPH-1M Plus, perform the following steps:
•
Connect the device to a PC using NetView&Modem.
•
Go to the Parameters – Connections – WLAN section.
•
At the Mode dropdown, select the mode type and confirm to reboot the device (if
needed).
•
For connecting to the device (server mode), use the corresponding block of parameters
with SSID and password. Connect to the unit using an external Wi-Fi device.
•
For connecting to the device (client mode), use the corresponding block of parameters
with SSID and password. Fill in the SSID and password of an operating WLAN network.
For more details, please see the NetView&Modem User Manual.
