Javad Maxor, User Manual

Page: 35 / 142

www.javad.com Maxor User’s Manual 2-1
C
ONFIGURATION
2
This chapter discusses how to configure the Maxor, including instructions for
charging the receiver, connecting to a computer, configuring the receiver’s
MinPad interface, on-board radio modem, and Bluetooth module. This
information is described in the following sections:
Powering the Maxor . . . . . . . . . . . . . . . . . . . . page 2-2
Charging the Maxor. . . . . . . . . . . . . . . . . . . . . page 2-7
Connecting the Maxor and a Computer. . . . . . page 2-8
Maxor Configuration . . . . . . . . . . . . . . . . . . . page 2-12
MinPad Configuration . . . . . . . . . . . . . . . . . . page 2-15
Radio Configuration . . . . . . . . . . . . . . . . . . . page 2-21
Bluetooth Module Configuration. . . . . . . . . . page 2-31
Collecting Almanacs . . . . . . . . . . . . . . . . . . . page 2-34
Chapter Tip:
Before you can use your Maxor receiver, you need to:
1.
Charge the batteries. See “Charging the Maxor”.
2.
Configure the various parts of your receiver. See:
• “Connecting the Maxor and a Computer”,
• “Maxor Configuration”,
• “MinPad Configuration”,and
• “Radio Configuration” (if applicable).
3.
Collect an almanac. See “Collecting Almanacs”.