Javad Maxor, User Manual

Page: 68 / 142

2-34 Maxor User’s Manual www.javad.com
2
C O N F I G U R A T I O N
Collecting Almanacs
Notice If you do not need security settings, leave these
parameters disabled.
Figure 2-42. BTCONF Security Parameters
9. Click the Serial Interface tab (Figure 2-43). Enable Echo to display
Bluetooth module replies and corresponding commands on the computer
terminal. If needed, click Apply.
Figure 2-43. BTCONF Serial Interface Tab
10.
Click Disconnect then Exit to quit BTCONF.
Collecting Almanacs
Each satellite broadcasts a message (almanac) which gives the approximate
orbit for itself and all other satellites. If the receiver has an almanac, you can
considerably reduce the time needed to search for and lock on to satellite
signals.
The receiver regularly updates the almanac and stores the most recent almanac
in its Non-Volatile Random Access Memory (NVRAM).
1.
Set up the receiver (connect the external antenna if needed) in a location
with a clear view of the sky.