In the Communication/Power Management
tab activate the UHF interface:
Figure 18. HPT404BT JL Power Management tab
Detailed connection status you can check in
Status/UHF int. tab
Figure 19. HPT404BT JL UHF Int. Status tab
3. Setup Serial Port
In the Communication/Advanced tab select
“Serial port as” parameter as Terminal.
Click “Save Setting” button and wait until
finish.
Figure 20. HPT404BT JL Advanced tab
4. Reboot device
In the Administration/Management tab click
“Reboot” button and wait until reboot.
Figure 21. HPT404BT JL Administration Man-
agement tab
5. Setup Router
In the Setup/Router tab select following pa-
rameters “UHF Modem” as Source and “Se-
rial port“ as Destination.
Click “Save Setting” button and wait until
finish.
13
HPT404BT JL USER MANUAL
