Javad HPT225BT, Operator'S Manual

Page: 33 / 48

Command Line Interface
Special Commands
33 www.javad.com
4. Special Commands
4.1. BOOT
The factory software image and default configuration is set for the new unit. The BOOT command is
intended to reboot the unit using specified software image and selected configuration.
BOOT IMAGE
BOOT CFG
The BOOT command with no parameters selects the user settings defined by the prior “parameterized”
BOOT commands.
4.2. HELP
The HELP command types the list of all available commands:
HELP- Display this usage
BOOT- Reboot the unit
LINK- Set RF Link Operation Mode
DPORT- Set Data Port Configuration
MPORT- Set Maintenance Port Configuration
ALARM- Alarm Indication and Alarm Control Configuration
SLEEP- Set Sleep Mode Configuration
STATE- Display Status and Statistics
SAVE- Save Current Configuration into Configuration File
INFO- Display Product ID along with Hardware/Software Versions
ATI- Display Product ID along with Hardware/Software Versions
MAP- Operates with Channel Map
DATAMODE- Exit Command Mode
[COMMAND] /?- Display Command Usage
4.3. SAVE
The SAVE command is intended to store the unit’s currently used configuration into the User
Configuration file. The configuration stored in the User Configuration file is activated by automatically
after unit’s reboot.